Gold foil 0.01 mm Au 99.9 GOST 24552-2014

Gold foil 0.01 mm thick is available in gold grade Au 99.9 per GOST 24552-2014.

• Product type: foil.
• Thickness: 0.01 mm.
• Material grade: Au 99.9.
• Reference document: GOST 24552-2014.

Sheet or roll size, tolerances, delivery condition, packaging, and batch volume must be agreed upon before ordering.

Purpose and applications

Gold foil is chosen as a thin semi-finished product for laboratory, electrical, and technological work where specified thickness and controlled metal grade are important. Suitability for a specific application is determined by sheet or roll format, surface condition, and project requirements.

How to select the configuration

The main selection parameters are already listed in the product card: product type, size or thickness, gold grade, and reference document. Additionally, determine working dimensions, tolerances, delivery condition, flatness or straightness requirements, and acceptable processing methods. Grades with similar designations should not be considered interchangeable without verifying composition and documentation. This item specifies grade Au 99.9; the acceptability of this gold and impurity content should be confirmed against project requirements.

Working with the material

Thin foil is sensitive to creases, scratches, and surface contamination. When cutting and handling, use clean tools, avoid contact with materials that could leave inclusions, and determine the allowable deformation direction in advance. Choose the fixing method considering the thickness and subsequent processing.

Quality control

For incoming inspection, compare the marking and actual geometry with the order, check surface integrity and completeness of accompanying documents. The content of the base metal, impurities, and test method must be confirmed by the batch passport or certificate. The GOST or TU reference in the name does not replace agreement on the specific configuration.