Gold strip 0.3 mm Au 99.99 GOST 7221-2014

Gold strip 0.3 mm thick is available in gold grade Au 99.99 per GOST 7221-2014.

• Product type: strip.
• Thickness: 0.3 mm.
• Material grade: Au 99.99.
• Reference document: GOST 7221-2014.

Width, length, tolerances, delivery condition, packaging, and batch size must be agreed upon before ordering.

Purpose and applications

The gold semi-finished product is intended for professional technological and research work. It is selected based on product type, geometry, metal grade, reference document, and requirements for further processing. The purpose of a specific part is determined by the project documentation.

How to select the configuration

The main selection parameters are already listed in the product card: product type, size or thickness, gold grade, and reference document. Additionally, working dimensions, tolerances, delivery condition, flatness or straightness requirements, and acceptable processing methods should be determined. Grades with similar designations cannot be considered interchangeable without verifying composition and documentation. This item specifies grade Au 99.99: it is chosen when the project imposes stricter requirements on gold content and impurity control.

Working with the material

When cutting, forming, and installing, it is important to preserve the material surface and avoid foreign inclusions. The tool and processing mode are selected based on the product geometry and delivery condition. Tolerances after additional processing must be considered when ordering the blank.

Quality control

For incoming inspection, compare the marking and actual geometry with the order, check surface integrity, and verify the completeness of accompanying documents. The content of the base metal, impurities, and test method must be confirmed by the batch passport or certificate. The GOST or TU reference in the name does not replace the approval of the specific configuration.